Re: Fleet map and type 1 or 2? or a custom Fleet Map

Subject:

Comments:
: The King County/Valley Com system is TYPE 2. There isn't a fleetmap required for this system. : The advantage to programming as a type one system applies only to the early trunk trackers such as the BC235, BC895, Pro90 etc. These radio's did not ignore the status bits such as +2 for emergency or +3 for a patch. The BC245, BC780, Pro92, Pro2067 etc.. do not need to be set up as type 1. See the below link for a complete description on how to do this. : http://www.interceptradio.com : I hope this helps to clear up the confusion. : Happy New Year!! : Vince. : : ************** : : Greetings all, : : I'll try that setting, too, and see if it helps because I have the same question / concern with my receiver because I am a novice at trunked systems. : : I did find this related post on the "strongsignals" page. It speaks to the fact that the Uniden-supplied Fleet Maps are really pretty useless. Try this address: : : http://www.strongsignals.net/bc780xlt/messages/140.html : : Now the real question is who, if anyone, can help us with a real close facimile of the proper fleet map(s) for the King Co. system(s)??? : : Any ideas out there ?? : : ************** : : : Hi there, : : : For the King County/Valcom, I use Type 1 with everything set at 00. : : : : Ok, I have most of the freq's for Seattle, KCPD, and Eastside fire. Now, should I use one bank for SPD/SFD, and another bank of channels for KC and east side? And, is it type 1 or type 2 motorola? And, what do I set the fleet map to? It starts out on S-00, and I can enter different numbers like S-11 or S-4. I have no clue as to which fleet map to use. It seems that there are 7 blocks to enter this size code into. Right now I have them on S11, and it is not working correctly. I get SPD north, west, south, and some KCPD chat, when using only SPD north 3280 ID #. I need help here.....