In Reply to: Re: Fleet map and type 1 or 2? posted by Chris on December 31, 2000 at 13:28:09:
**************
Greetings all,
I'll try that setting, too, and see if it helps because I have the same question / concern with my receiver because I am a novice at trunked systems.
I did find this related post on the "strongsignals" page. It speaks to the fact that the Uniden-supplied Fleet Maps are really pretty useless. Try this address:
http://www.strongsignals.net/bc780xlt/messages/140.html
Now the real question is who, if anyone, can help us with a real close facimile of the proper fleet map(s) for the King Co. system(s)???
Any ideas out there ??
**************
: Hi there,
: For the King County/Valcom, I use Type 1 with everything set at 00.
: : Ok, I have most of the freq's for Seattle, KCPD, and Eastside fire. Now, should I use one bank for SPD/SFD, and another bank of channels for KC and east side? And, is it type 1 or type 2 motorola? And, what do I set the fleet map to? It starts out on S-00, and I can enter different numbers like S-11 or S-4. I have no clue as to which fleet map to use. It seems that there are 7 blocks to enter this size code into. Right now I have them on S11, and it is not working correctly. I get SPD north, west, south, and some KCPD chat, when using only SPD north 3280 ID #. I need help here.....