InterceptRadio.com Forums

Can anyone verify these setting for the Abraham Lincoln TRS ID
5C36 in downtown Everett... They seem to work on my BCT396T

Type is Mot UHF
Mod is FM ( not auto/NFN)
ct 90.0
CCs are 411.95 412.475

Bandplan 1 Base 406.15 Step 5 Off 380

VC 380 - 406.15
VC 407 - 406.2875
VC 460 - 406.55
VC 485 - 406.675
VC 565 - 407.075

Bandplan 2 Base 409.075 Step 6.25 Off 574

VC 575 - 409.08125

Bandplan 3 Base 410.025 Step 25 Off 652

VC 652 - 410.025
CC 729 - 411.95
CC 750 - 412.475

That's the old SysID and tone, with a new bandplan. But the plan seems unnecessarily complicated: 5 kHz spacing? And without narrow deviation? It doesn't work for the second channel (really #407.5).

Their range (over 6 MHz) can't be covered by a single section at 6.25 or 12.5 kHz spacing, given Type II wants channels 380-760, but it looks like somebody had fun setting this up. I see the voice channels are in the new 406-411 MHz 'repeater output' range, and the control channels are in the 411-415 'simplex' range - I guess technically they don't repeat. Would be nice to know if all the inputs are +9 MHz.

Flash

Are you hearing transmissions now on 411.95 and 412.4765? I just tried them and nothing. But moved from overlooking the Everett base to 12 miles to the west about 350' MSL. So I should be able to hear them if they are still there, but nothing this morning.
DennisE

The band plan is what I worked out to get to where I was hearing voice. I wonder if I was getting input voice or output voice? I will work on it more in the near future when I can get back to town. I was hoping someone nearer was interrested. I saw that +9 would jump out of the 420 limit but I know the CCs are good and the voices match unitrunker.