| InterceptRadio.com Forums http://interceptradio.com/bbs/ |
|
| discriminator tap http://interceptradio.com/bbs/viewtopic.php?f=1&t=3078 |
Page 1 of 1 |
| Author: | motorola20 [ Wed Aug 12, 2009 6:27 pm ] |
| Post subject: | discriminator tap |
Hey guys, I'm getting the new bearcat 346XT in on monday and am wondering if anybody here knows how to do a discriminator tap on this model ? Would pay to have it done. // Brad |
|
| Author: | Atomic Taco [ Thu Aug 13, 2009 12:22 am ] |
| Post subject: | Re: discriminator tap |
Not sure what you're trying to do, but it already has packet output. |
|
| Author: | SpudGunMan [ Thu Aug 13, 2009 6:18 am ] |
| Post subject: | Re: discriminator tap |
yea the only hardware change to the radio is it now has a TAP pre done for you like the GRE units. I say this nicely but I will show you where in the manual it is for 5 bucks start with this in the index... Control Channel Data Output – allows the analysis of control channel data without the need to perform invasive modifications to the scanner |
|
| Author: | Rich [ Thu Aug 13, 2009 6:34 am ] |
| Post subject: | Re: discriminator tap |
What if he is interested in something other than control channel data ? |
|
| Author: | FlashP [ Thu Aug 13, 2009 6:34 am ] |
| Post subject: | Re: discriminator tap |
Unfortunately most of the software available for decoding control channels (Trunker et al) won't read the scanner's output, it still relies on raw audio. So I think the tap is still a useful mod. Since you're going to park the radio on the control channel, anything radio that will tune that frequency will work... it need not be done on your new, fancy one. That said, since the 346XT looks a lot like a 396T and XT, I suspect the mod similar. Flash |
|
| Author: | SpudGunMan [ Thu Aug 13, 2009 9:49 am ] |
| Post subject: | Re: discriminator tap |
I thought it was a extra tap on the radio? thats the way they billed the feature orginally is it a digital output for uniden software only? I should RTFM Update: Im the asshole! http://info.uniden.com/twiki/bin/view/U ... putFeature I didnt see a Official "how to" however the yahoo group for the radio would be the place to start asking. Otherwise if your not handy with a solder. im sure someone will offer up. I live in renton and could assist. |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Copyright © 2013 Interceptradio.com |
|